Back to New Modular Din-Rail
DIN-DDCW3

Digital Three Phase Current Monitor- DDCW3

R1,603.63

Multi-function four digit counter/timer designed with the latest microprocessor technology. Setup and ranges can be adjusted with an easy to access and control menu system to make all common function available. The counter can be configured to accept two proxy, one for up and the other for down count. Timer can be activated with proxy as well.

 

Features:

 

  • Microprocessor Controlled
  • Multi Function
  • Two Relay Outputs
  • Hysteresis
  • 4 Digit Display
  • User Friendly Menu System
  • Startup Delay Response Delay
  • Over / Under Current Setting
  • Modular 53.5mm Din Rail Mountable
  • 2 * 8a SPST Output Relay
Clear selection
Category:

Description

Time Specifications

Time Range (Timer)
0.1 – 999.9 sec
1 – 9999 sec
0.1 – 999.9 min
1 – 9999 min
0.1 – 999.9 hrs
1 – 9999 hrs
Range Accuracy ≤ 0.1%
Time Variation < 0.05% / V
≤ 0.2% / °C
Reset Time 200 ms
Pulse Frequency (Counter) 10000Hz
Relay Pulse Duration 0-20 sec

Input Specifications

Probe Type NPN 3 wire proximity switch
Pin 5 Positive supply
Pin 14 Negative supply
Pin 11/13 Probe Input
Probe Voltage ±20 VDC
Short Circuit Current 25mA
Minimum Response Time 0.01 sec

Output Specifications

Relay Output SPDT
Rated Isolation Voltage 6000 VAC (contact / electric)
1000 VAC (contact / contact)
Nominal Rate in AC1 (AG-Ni) 1500 VA
Rated Current 10A
Rated Voltage 250V
Mechanical Life 10×106 cycles
Electrical Life 10×103 cycles (at max load)
Operation Frequency ≤ 1800 cycles/h

Supply Specifications

Power Suppy AC Type 110, 230, 400V ± 10%
(Galvanic) 50 / 60 Hz ± 5%
Galvanic Isolation 4kV
Consumption ± 3VA
±6 VA 525 VA
Power Suppy DC Types 24, 48 V ± 10%
(Non-galvanic)
Galvanic Isolation None
Consumption ± 300mA

General Specifications

Power ON Delay ≤ 500ms
Indication Two sets of 4 7- Segment Red LED’s Flashing R1 on when relay active
Count Top display
Set point / status Bottom display
Backup Battery life +/- 3 years

Additional information

Supply Voltage

525Vac, 400Vac, 230Vac, 110Vac

Reviews

There are no reviews yet.

Be the first to review “Digital Three Phase Current Monitor- DDCW3”

Related products

Electro-DLL-Liquid-level-controller
Liquid Level Timer – DLL

Level control relay for conductive liquids selectable for filling and emptying applications with adjustable sensitivity. The unit can be wired for three wire application to control levels between High and Low probe or two wire applications for alarm indication. Filling or emptying can be selected via front slide switch.

 
Features:
 
  • Microprocessor controlled
  • Front face selection Filling / Emptying
  • Front face adjustable sensitivity: 0-80 kohm
  • Low voltage AC probe signal
  • Modular 35.5mm DIN rail mountable
  • 10A SPDT output relay
  • LED indication for relay and power supply ON
R530.43 Select options This product has multiple variants. The options may be chosen on the product page
Load Shed Relay with Real Time Clock – DRLS
Load Shed Relay with Real Time Clock – DRLS

Load shed relay designed with the latest microcontroller featuring high resolution analogue converter to produce precise switching levels. The unit is designed to monitor current consumption and disconnect non-critical loads from the system if the load exceeds the limit and during peak times.

 
Features:
 
  • High resolution analogue microprocessor
  • Real time clock for geyser disable
  • 15 min response delay
  • Front lable button for disable and boost
  • Modular 35.5mm DIN rail mountable
  • High Current 16A SPST output relay
  • LED indication for relay and power supply ON
R912.13 Select options This product has multiple variants. The options may be chosen on the product page
Electro-DLS3-Three-cicuit-loadshed-relay
Three Circuit Load Shed Relay Clock – DLS3

Load shed relay designed with the latest microcontroller featuring high resolution analogue converter to produce precise switching levels. The unit is designed to monitor current consumption and disconnect non-critical loads from the system if the load exceeds the limit.

 
Features:
 
  • High resolution analogue microprocessor
  • Step and Cyclic Function
  • 5min Cycle time
  • 5A/15A selectable input with 20A Peak current
  • 1 x High Current 16A SPDT ouput relay
  • 2 x 6A SPST output relay
  • Adjustable current limit
  • Modular 53.5mm Din RailMountable
R759.81 Select options This product has multiple variants. The options may be chosen on the product page
Electro-DMSA-Multi-start-timer
Multi Start Attempt – DMSA

Multi start attempt unit that can be selected to start 3-8 times before energizing the alarm relay. The unit can be supplied with voltages ranging from 10-30Vdc. Start and Stop time can be adjusted from 1-30sec.

 
Features:
 
  • Microprocessor controlled
  • Multi starts selectable
  • Adjustable start and stop times
  • Power supply form 10- 30 Vdc
  • Modular 53.5mm Din Rail Mountable
  • 6A SPDT Alarm relay
  • 6A DPDT Start relay
R637.95 Select options This product has multiple variants. The options may be chosen on the product page