Back to New Modular Din-Rail
Electro-DDTC-Multifunction-Temperature-Controller

Digital Temperature Controller – DDTC

R887.04

Multi-function four digit counter/timer designed with the latest microprocessor technology. Setup and ranges can be adjusted with an easy to access and control menu system to make all common function available. The counter can be configured to accept two proxy, one for up and the other for down count. Timer can be activated with proxy as well.

 

Features:

 

  • Microprocessor controlled
  • Multi Range
  • Multi Function
  • User friendly menu system
  • Interface and power supply for NPN proxys
  • Modular 53.5mm Din rail mountable
  • 10A SPDT output relay
Clear selection
Category:

Description

Probe Specifications

Probe Type Digital Temperature Probe (TP1)

Time Specifications

Input Specifications

Probe Type NPN 3 wire proximity switch
Pin 5 Positive supply
Pin 14 Negative supply
Pin 11/13 Probe Input
Probe Voltage ±20 VDC
Short Circuit Current 25mA
Minimum Response Time 0.01 sec

Output Specifications

Relay Output SPDT
Rated Isolation Voltage 6000 VAC (contact / electric)
1000 VAC (contact / contact)
Nominal Rate in AC1 (AG-Ni 1500 VA
Rated Current 10A
Rated Voltage 250V
Mechanical Life 10×106cycles
Electrical Life 10×103 cycles (at max load
Operation Frequency ≤ 1800 cycles/h

Supply Specifications

Power Suppy AC Type 110, 230, 400V ± 10%
(Galvanic) 50 / 60 Hz ± 5%
Galvanic Isolation 4kV
Consumption ± 3VA
±6 VA 525 VA
Power Suppy DC Types 24, 48 V ± 10%
(Non-galvanic)
Galvanic Isolation None
Consumption ± 300mA

General Specifications

Power ON Delay ≤ 500ms
Indication Two sets of 4 7-Segment Red LED’s Flashing R1 on when relay active
Count Top display
Set point / status Bottom display

Additional information

Supply Voltage

525Vac, 400Vac, 230Vac, 110Vac, 48Vac/dc, 24Vac/dc, 12Vac/dc

Reviews

There are no reviews yet.

Be the first to review “Digital Temperature Controller – DDTC”

Related products

DIN-DVW3
Voltage Window Comparator – DVW3

Three Phase Voltage Window Comparator for monitoring supply voltage between two levels. The unit is for all three phase voltage monitoring applications to protect valuable equipment. With the wide range of delays, the protection is extended to prevent immediate re-starts. Over and under voltage can be set via front panel dials. The latch facility prevents unmonitored fault conditions. Hysteresis is fixed at 5%.

 
Features:
 
  • High resolution analogue microprocessor
  • Front face adjustable over and under voltage levels
  • Monitors own supply
  • Detects phase reversal
  • 4 Front face selectable delays
  • Optional latch facility
  • Modular 35.5mm DIN rail mountable
  • 10A SPDT output relay
  • LED indication for over and under voltage
  • Indication for phase reversal (both under and over LED ON)
  • LED indication for power supply ON
R611.07 Select options This product has multiple variants. The options may be chosen on the product page
Four Probe Level Controller – DLL4
Four Probe Level Controller – DLL4

Level control relay for conductive liquids selectable for wide range of level and pump control. The unit features probe inputs for high and low level as well as low alarm and high alarm. Two relay outputs with varying function are available. The sensitivity, response delay and functions can be set on the front mounted dials.

 
Features:
 
  • Latest Microcontroller technology
  • 4 probe advanced level controlling
  • 6 Front face selection functions
  • Front face adjustable sensitivity: 0-80 kohm
  • Front face adjustable response delay: 0-10 sec
  • Low voltage AC probe signal
  • Modular 53.5mm DIN rail mountable
  • 2 x 10A SPDT output relay
  • LED indication for Relay1 and Relay 2 ON
  • LED indication for power supply ON (flashing if delay)
R821.63 Select options This product has multiple variants. The options may be chosen on the product page
Electro-DLS-Load-shed-relay
Load Shed Relay – DLS

Load shed relay designed with the latest microcontroller featuring high resolution analogue converter to produce precise switching levels. The unit is designed to monitor current consumption and disconnect non-critical loads from the system.

 
Features:
 
  • High resolution analogue microprocessor
  • Front face selectable trip level 5 / 10A
  • 15 min response delay
  • Modular 35.5mm DIN rail mountable
  • High Current 16A SPST output relay
  • LED indication for relay and power supply ON
R668.42 Select options This product has multiple variants. The options may be chosen on the product page
Electro-DVW1-Voltage-window-comparitor
Voltage Window Comparator – DVW1

Single Phase Voltage Window Comparator for monitoring supply voltage between two levels. The unit is ideal for all single phase voltage monitoring applications to protect valuable equipment. With the wide range of delays, the protection is extended to prevent immediate re-starts. Over and under voltage can be set via front panel dials. The latch facility prevents unmonitored fault conditions. Hysteresis is fixed at 5%.

 
Features:
 
  • High resolution analogue microprocessor
  • Front face adjustable over and under voltage levels
  • Monitors own supply
  • 4 Front face selectable delays
  • Optional latch facility
  • Modular 35.5mm DIN rail mountable
  • 10A SPDT output relay
  • LED indication for over and under voltage
  • LED indication for power supply ON
R605.70 Select options This product has multiple variants. The options may be chosen on the product page