Back to 11 Pin Plug In Units
Electro-LA5-Current-Monitor

Current Monitor – LA5

$37.26

The LA5 is a precise UNDER / OVER current monitoring relay. The unit can be ordered in many AC / DC current ranges, making it ideal for many current monitoring applications. The set point and hysteresis can be adjusted with separate potentiometers. The unit also incorporates a latch facility to prevent undetected failures. For applications which necessitate a CT, all units are supplied with a terminating resistor to prevent open circuit.

 

Features:

 

  • Monitoring relay for current control
  • Measures separate current input
  • Rear DIP switch selection of UNDER / OVER current
  • Rear DIP switch selection for 10sec start-up delay
  • Potentiometer adjustable current limits
  • Potentiometer adjustable hysteresis limits
  • Power supply ON and Relay ON LEDs
  • Latch facility incorporated
  • Output 10 A SPDT relay
Clear selection
Category:

Description

Input Specifications

Input Pin 5 & 7
Measuring 1 – 5 A
Internal Resistance 0.1Ω
Maximum Overload Current 10 A (30 sec)
Measuring Ranges (1A) 0.2 – 1A
Internal Resistance 5.6Ω
Maximum Overload Current 5 A (30 sec)
Hysteresis 5 – 50%
Repeat Accuracy <1%
Response Time 1 sec
Start-up Delay 10 sec

Output Specifications

Output Specifications SPDT
Rated Isolation Voltage 6000 VAC (contact / electric)
1000 VAC (contact / contact)
Nominal Rate in AC1 (AG-Ni) 1500 VA
Rated Current 10A
Rated Voltage 250V
Mechanical Life 10×106 cycles
Electrical Life 10×103 cycles (at max load)
Operation Frequency ≤ 1800 cycles/h

Supply Specifications

Power Suppy AC Type 110, 230, 400V, 525V ± 10%
(Galvanic) 50 Hz ± 5Hz
Isolation 4kV
Consumption ± 3VA
±6 VA 525 VA
Power Suppy DC Types 12, 24, 48 V ± 10%
(Non-galvanic)
Isolation None
Consumption ± 100mA

General Specifications

Power ON Delay ≤ 300 ms
Power OFF Delay ≤ 200 ms
Indication for
Power Supply ON LED red
Output ON LED red
Environment
Degree Of protection IP 20
Operating Temperature -10 to + 50°C
Storage Temperature -50 to + 85°C
Weight 200g

Additional information

Supply Voltage

525Vac, 400Vac, 230Vac, 110Vac, 48Vac/dc, 24Vac/dc, 12Vac/dc

Reviews

There are no reviews yet.

Be the first to review “Current Monitor – LA5”

Related products

PLUGIN-TP2
Two Shot Timer – TP2

Microprocessor based two-shot timer with two selectable modes of operation and eight separately selectable ON and OFF time ranges from 0.3 sec - 60 hrs. The ON and OFF times can only be selected from the A or B range and not both.

 

Extensive applications due to combination of functions and time ranges. Due to the advanced design of the unit a high accuracy can be achieved. Any adjustment on the front potentiometers after the supply is applied is not acknowledged. This prevents unwanted changes of the time range.

 

The ON and OFF times can be adjusted independently.

 
Features:
 
  • Microprocessor based design
  • Time range 0.3sec – 60hrs
  • Rear DIP switch selection of 8 separate ON and OFF timer ranges
  • Separate potentiometer adjustable time settings for ON and OFF period
  • Selectable ON or OFF time first
  • Repeatable deviation: <0.2%
  • Power supply ON and Relay ON LEDs
  • Output SADPDT
$36.50 Select options This product has multiple variants. The options may be chosen on the product page
Solid State Flasher – SSF1
Solid State Flasher – SSF1

The solid state flasher is designed to eliminate mechanical wear and tear and arcing when switching incandescent lamps continuously. The unit also has selectable interval timing forwarning signals.

 
Features:
 
  • Microprocessor based design
  • 90 Flashes per second
  • Triac output SA 1000W/250V
  • Selectable Internal timing
  • Two complementary output
  • 95 – 230V AC supply
$38.32 Select options This product has multiple variants. The options may be chosen on the product page
Pump Seal Protection – PSP1
Pump Seal Protection – PSP1

Microprocessor based monitoring relay to measure moisture in a submersible pump. Due to the advanced design of the unit a high accuracy and safety is achieved. Response delay are incorporated to prevent nuisance tripping. The unit energises on application of supply. If the current through the probes is more than 20uA or the resistance is smaller than 10 Mohm, the relay will de-energise after 10 sec. The relay will energise if the current is less than 15uA and the resistance is more than 1.4Mohm.

 
Features:
 
  • Microprocessor based design
  • High accuracy analogue converter
  • Repeatable deviation: <0.2%
  • Power supply ON and Relay ON LEDs
  • Output 5A DPDT
$29.73 Select options This product has multiple variants. The options may be chosen on the product page
Electro-LP3-Pump-protection-relay
Pump Protection Relay – LP3

Microprocessor based pump protection relay capable of protecting a submersible pump against all major power line faults. The unit calibrates itself under normal running conditions and stores these parameters in non-volatile memory. The unit also in corporate a reset delay for under current situations to enable the borehole to replenish itself. Inan over current situation the unit will retry three times to prevent permanent tripping with temporary blockages.

 
Features:
 
  • Microprocessor based protection relay
  • Over / Under Current Protection
  • Over / Under Voltage Protection
  • Phase Failure / Phase Reversal Protection
  • Selectable Under Current Reset Delay
  • Three retries for Over Current
  • Automatic Self Diagnosis of Pump
  • LED indication for all faults
$43.97 Select options This product has multiple variants. The options may be chosen on the product page