Back to 11 Pin Plug In Units
white-2-16

Solid State Flasher – SSF1

$38.32

The solid state flasher is designed to eliminate mechanical wear and tear and arcing when switching incandescent lamps continuously. The unit also has selectable interval timing forwarning signals.

 

Features:

 

  • Microprocessor based design
  • 90 Flashes per second
  • Triac output SA 1000W/250V
  • Selectable Internal timing
  • Two complementary output
  • 95 – 230V AC supply
Clear selection
Category:

Description

Input Specifications:

Time Ranges 90 pulses per second
Range Accuracy < 1%
Repeat Accuracy ± 0.2%
Time Variation ≤ 0.5% / V
within rated power supply and ambient temperature ≤ 0.5% / °C
Reset Time 800 ms

Output Specifications

Output Specifications 90 pulses per second
Rated Isolation Voltage < 1%
Rated Current ± 0.2%
Rated Voltage < 0.5% / V
Mechanical Life < 0.5% / °C
Electrical Life —
Operation Frequency 800ms

Supply Specifications:

Power Suppy AC Type
(Galvanic)		 110, 230, 400V ±
10% 50 / 60 Hz ± 5Hz
Isolation None
Consumption ±2VA

General Specifications:

Environment
Degree Of protection IP 20
Operating Temperature -10 to + 50°C
Storage Temperature -50 to + 85°C
Weight 200g

Additional information

Supply Voltage

230Vac, 1100Vac

Reviews

There are no reviews yet.

Be the first to review “Solid State Flasher – SSF1”

Related products

Electro-LP3-Pump-protection-relay
Pump Protection Relay – LP3

Microprocessor based pump protection relay capable of protecting a submersible pump against all major power line faults. The unit calibrates itself under normal running conditions and stores these parameters in non-volatile memory. The unit also in corporate a reset delay for under current situations to enable the borehole to replenish itself. Inan over current situation the unit will retry three times to prevent permanent tripping with temporary blockages.

 
Features:
 
  • Microprocessor based protection relay
  • Over / Under Current Protection
  • Over / Under Voltage Protection
  • Phase Failure / Phase Reversal Protection
  • Selectable Under Current Reset Delay
  • Three retries for Over Current
  • Automatic Self Diagnosis of Pump
  • LED indication for all faults
$43.97 Select options This product has multiple variants. The options may be chosen on the product page
Pre Select Counter – XP404
Pre Select Counter – XP404

The XP404 is a fully programmable microprocessor controlled four digit counter / timer. The set value can be entered via the front membrane switch and the function, range, relay action and UP or DOWN count / time is set with an extended menu. The unit also incorporates a supply for a NPN proximity switch which can be used to pulse the counter.

 
Features:
 
  • Microprocessor based design
  • Counter/Timer function with up/down option
  • Relay On or pulse (variable) on reaching count/time
  • Front mounted membrane switch to select count
  • User friendly menu for all functions and settings
  • 4 Seven segment displays (max. Count 9999)
  • Power supply for 3 wire NPN proximity switch
  • Permanent memory for selected count
  • Reset facility incorporated
  • Output 10A SPDT relay
$53.94 Select options This product has multiple variants. The options may be chosen on the product page
Pump Sequence Relay – PSR1
Pump Sequence Relay – PSR1

Pump sequence module is designed to optimize the wear on pumps, compressors or generators. The first input energizes the first pump and stores this in non-volatile memory. Subsequent inputs will energize the next output. The number of its outputs correspond to the number of outputs. After power down or no inputs activated and an input is activated, the next in the sequence of outputs is activated. This ensures balanced usesage of the pumps because the same pump is not activated at the beginning of a sequence.

 
Features:
 
  • Three normally open pressure switch inputs (voltage free)
  • Three normally open pump outputs
  • Permanent memory for next pump activated after power off
  • Output 10A SPDT
$34.43 Select options This product has multiple variants. The options may be chosen on the product page
Two Hand Control Module – THC1
Two Hand Control Module – THC1

The unit is designed for machines where the operator has to push two buttons to activate the machine itself (two hand control). A latch facility is incorporated to use with a foot switch.

 
Features:
 
  • Two normal open inputs for two hand control
  • Latch input for foot control
  • Fixed time to activate both hand control
  • Power supply ON and Relay ON LEDs
  • Output 10A SPDT
$33.62 Select options This product has multiple variants. The options may be chosen on the product page